Hug'N'Hangers, Hug Your Trees and Hang Your Things

Tips
	To help prevent damage to growing trees, adjust your Hug 'N' Hanger once a year. Simply remove it from the tree, and then put it back on. Paint or stain your Hug 'N' Hanger if it is exposed to the elements, especially if it gets wet often. This will help prevent premature deterioration of the wood. If you don't paint your hanger, apply a good waterproofing material to it annually. Avoid bending your Hug 'N' Hangers around a 90 degree corner. Although the Hug 'N' Hanger is quite flexible, it can be broken. It is normal for cracks to appear in the surface of the hanger as you bend it into a circle. This does not mean there is a problem with your hanger. When the cracks begin appearing, do not bend the device any further. Do not hang more than 10 pounds from a Hug 'N' Hanger peg hook. The hanger will break if you put too much weight on a hook.
Frequently Asked Questions
	1. Can I get a longer or shorter Hug 'N' Hanger? At this time we make only the 16" model. However, we will expand the selection of available hangers based on feedback from customers. So please fill out our feedback form so we know what you would like. 2. Can I get straps in colors other than black? At this time we make only the black straps. However, we will expand the selection of available straps based on feedback from customers. So please fill out our feedback form so we know what you would like. 3. Do I have to paint my Hug'N'Hanger? No, your Hug 'N' Hanger will last for years even if you don't paint it or water proof it. However, water proofing or painting will extend the life of your hanger. 4. My hanger is too long to fit the object I want to put it on. The Hug 'N' Hanger can be made to fit smaller circumferences by adding some padding under the hanger, which effectively increases the diameter the hanger must go around. 5. My hanger is too short to fit the object I want to put it on. The Hug 'N' Hanger can be connected to other Hug 'N' Hangers to fit larger objects. Simply use a cable tie in the anchor holes to secure two hangers together. Also, we offer a extra cable ties for sale. You can connect cable ties together to make a strap of any length you need. 6. I see a lot of cracks on my hanger. What's wrong with it? Surface cracks on the Hug 'N' Hanger are completely normal. Remember, this is a wood product, and wood does not typically bend so much. You'll notice that the wooden portion of the hanger is composed of 3 layers, and the cracks only apear in the first layer. So long as you do not stress the wood by bending it too far, the cracks will not hurt anything. 7. Can I get a different peg hook? We plan to add a variety of peg hooks in the future. Please use our feedback form to let us know what type of hook you would like. 8. I like Hug 'N' Hangers so much, I want to sell them. How can I do that? Apply to be a Hug 'N' Hanger partner, or to be part of our resellers program. 9. I have a lot of extra strap on my Hug 'N' Hanger. Can I cut it off? Yes, but first try using a pin or paper clip to secure the excess strap. You may need the extra strap length at a later time. 10. Will Hug 'N' Hangers work on square or rectangular posts? The hanger cannot bend at a 90 degree angle without breaking. However, the straps can do this easily. So long as the straps, and not the hanger, go around the 90 degree corners, you can use Hug 'N' Hangers on cornered objects.